Methods for gilding bronze Buddhist statues

There are many types of Buddhist statues, and gold-leaf statues are one of them. Gold-leaf statues are a gold-leafing technique introduced from Taiwan, Japan, and other places, based on inheriting traditional sculpture techniques and absorbing the essence of folk art. It involves applying gold leaf to the surface of the statue. Gold-leaf statues represent a high form of art, and there are many different methods for applying the gold leaf. Below, we will briefly introduce two methods. 1. Traditional Gold-leafing Technique The effect of gold-leafing on handicrafts produced using the traditional gold-leafing technique varies, mainly due to differences in the preparation of the glue used for the base coat. Commonly used glues now include water-soluble glue and toothpaste glue.

2019-01-05

Three main reasons why bronze Buddha statues have always been highly popular

Since the development of bronze sculpture, it has always been one of people's favorite handicrafts. There are many types of it, but for thousands of years, bronze Buddha statues have been particularly popular, and their place in people's hearts has never changed. There are many reasons for its popularity, and today we will briefly introduce three points. Firstly, because China has been a Buddhist country since ancient times, worshiping gods and Buddhas is a traditional custom in China, and bronze Buddha statues are one of the most important expressions of Buddhism. It allows people to clearly see the Buddha in their minds and express a sense of worship. Buddha statues also embody the solemnity, sacredness, and compassion of Buddhism.

2019-01-05

Why did Guan Yu become a Buddhist guardian deity?

Guan Yu, a famous general in China during the late Eastern Han Dynasty, was canonized by successive emperors after his death, highly revered by the populace, and became an omnipresent deity honored by Confucianism, Buddhism, and Taoism, worshipped by the common people. Guan Gong culture, evolved from the worship of Guan Gong, is an important legacy of traditional Chinese moral culture and still deeply influences Chinese people today. Buddhism originated in India and developed in China, but why is Guan Gong, a native Chinese deity, seen in temples, consecrated as Sangharama Bodhisattva, and becoming a great protector of Buddhism? I. Origin of Sangharama Bodhisattva. 'Sangharama' is an abbreviation of 'Saṃghārāma,' translated as 'assembly garden,' which refers to the garden where monks reside, or commonly, a monastery or temple.

2018-11-27

Ancient incense burner

Introduction to Ancient Chinese Incense Burners Among ancient Chinese artifacts, incense burners were the most widely used, yet they varied significantly in form and style. In the common perception, an incense burner seems to be a device for lighting stick incense, so when discussing the styles of incense burners, most people's minds will always conjure up Song Dynasty Ge ware or Longquan ware double-eared burners, and then Ming Dynasty bronze Xuande burners and their imitations. In reality, the types and uses of incense burners are far more diverse than this, and their historical origins date back at least two thousand years. Most previous writings on incense burners merely described the objects themselves. In recent years, there have been specialized studies on incense burners, one of which is Yang Zhihui's "New Evidence for Names of Ancient Poetry and Prose" concerning incense burners and incense.

2018-11-27

Four methods for maintaining bronze sculptures

I. Silver Oxide Method: This method uses silver oxide in contact with cuprous oxide to seal the exposed surface of cuprous chloride, thereby controlling the corrosion of copper sculptures. First, use mechanical methods to remove powdery rust and expose the grayish-white waxy cuprous chloride. Then, mix silver oxide with alcohol to form a paste, apply it to the surface of the cuprous chloride, and place it in a humid environment to allow it to fully react, forming cuprous oxide and copper chloride, which cover the surface of the cuprous chloride. Both are stable salts. This process is repeated until the object shows no powdery rust corrosion points even when placed in a high-humidity environment. This method is suitable for objects with spot-like local corrosion and objects with metal inlays. II. Benzene

2018-11-27